Valves and strainers for water, air, steam and oil from KITZ and Crest Industrial Supplies, and JASH Schütte knife gate, slide gate, swing gate and double flap valves for bulk solids and slurries, and KSB MIL control valves, actuators and positioners for process control.
Industrial Valves – KITZ
KITZ
Bronze Gate Valve (S, H, E, FH, FR series)
Size
8 to 100 mm (1/4 to 4 in), varies by series
Class
Class 125 / Class 150 (S, H, FH, FR, E); 5K / 10K (M, L, LB)
End connection
Screwed BS21 (JIS B0203); flanged JIS B2011 (LB)
Body
Cast bronze or forged brass
Used for: General water and light service pipelines with screwed ends.
Key specifications
Size
8 to 100 mm (1/4 to 4 in), varies by series
Class
Class 125 / Class 150 (S, H, FH, FR, E); 5K / 10K (M, L, LB)
End connection
Screwed BS21 (JIS B0203); flanged JIS B2011 (LB)
Body
Cast bronze or forged brass
Used for: General water and light service pipelines with screwed ends.
Notes
Non-rising stem on the FH, FR and 150S types.
Stem: special brass (S, H, E, M, L, LB); copper-nickel alloy on 150S.
KITZ
Brass Ball Valve (T series)
Size
8 to 100 mm (1/4 to 4 in)
Class
Class 400
End connection
Screwed BS21 (JIS B0203)
Body / seat
Brass body, PTFE seat, standard port
Used for: Isolation of water, air and general fluids in small bore lines.
Key specifications
Size
8 to 100 mm (1/4 to 4 in)
Class
Class 400
End connection
Screwed BS21 (JIS B0203)
Body / seat
Brass body, PTFE seat, standard port
Used for: Isolation of water, air and general fluids in small bore lines.
Notes
Floating ball design.
Other KITZ bronze/brass ball valves in the same catalogue page: AKT (reduced port, ASME B1.20.1), TB (10K flanged, JIS B2240, cast bronze).
KITZ
Cast Steel Gate and Globe Valves (SCLS and SCJS series)
Size
40 to 600 mm (1 1/2 to 24 in), varies by series
Rating
JIS 10K and 20K; ASME Class 150 and 300
End connection
Flanged JIS B2220 or ASME B16.5
Body
SCPH2 / ASTM A216 Gr.WCB
Used for: Steam, oil and process lines. The catalogue also lists swing check valves (10SCOS, 20SCOS) in the same material.
Key specifications
Size
40 to 600 mm (1 1/2 to 24 in), varies by series
Rating
JIS 10K and 20K; ASME Class 150 and 300
End connection
Flanged JIS B2220 or ASME B16.5
Body
SCPH2 / ASTM A216 Gr.WCB
Used for: Steam, oil and process lines. The catalogue also lists swing check valves (10SCOS, 20SCOS) in the same material.
PN3 (45 psi) for C-601 / C-611; PN5 (70 psi) for C-602 / C-612
Temperature
-20 C to 250 C
Seating
Resilient seat with replaceable metal ring; inflatable seal on C-602 / C-612
Used for: Pressure-tight shut-off of powder and granular materials, with minimal material retention in the valve and leak-tight shut-off in standing columns.
Key specifications
Size
DN 100 (4 in) to DN 600 (24 in)
Pressure
PN3 (45 psi) for C-601 / C-611; PN5 (70 psi) for C-602 / C-612
Temperature
-20 C to 250 C
Seating
Resilient seat with replaceable metal ring; inflatable seal on C-602 / C-612
Used for: Pressure-tight shut-off of powder and granular materials, with minimal material retention in the valve and leak-tight shut-off in standing columns.
KU-STD and KU-HP+PAM: -20 to 250 C; KU-HT: 800 to 1100 C
Flange drilling
ASME B16.5 / B16.47 #150 / BS-EN 1092 PN10
Used for: Fast shut-off for powders and granular materials, pneumatic conveying and bed ash drain.
Notes
KU-STD (C-301, C-311): up to 3 bar; shut-off in less than 3 seconds, even manually; resilient seat with viper seal; manual or pneumatic.
KU-HT (C-312): special grade stainless steel for bed ash drain in coal fired boilers; shut-off in less than 1 second; integral or replaceable metal seat; manual or pneumatic.
KU-HP+PAM (C-303, C-313): bidirectional, for pressure and vacuum tight shut-off up to 5 bar (70 psi) in dense phase conveying; inflatable seal with replaceable metal ring; pneumatic only.
JASH Schütte
Double Flap Valve (DFG series, C-401 and C-402)
Size
Sq. 200 (8 in) to Sq. 400 (16 in) for C-401; Sq. 200 (8 in) to Sq. 300 (12 in) for C-402
Flow rate
1.0 to 4.5 m3/hr (C-401); 2.5 to 8.0 m3/hr (C-402)
Pressure / temperature
PN3 (45 psi); -20 C to 800 C
Operation
Counter weight, pneumatic, geared motor
Used for: Air lock, batching or metering in free-flowing and abrasive bulk materials.
Key specifications
Size
Sq. 200 (8 in) to Sq. 400 (16 in) for C-401; Sq. 200 (8 in) to Sq. 300 (12 in) for C-402
Flow rate
1.0 to 4.5 m3/hr (C-401); 2.5 to 8.0 m3/hr (C-402)
Pressure / temperature
PN3 (45 psi); -20 C to 800 C
Operation
Counter weight, pneumatic, geared motor
Used for: Air lock, batching or metering in free-flowing and abrasive bulk materials.
Notes
Metal seated with replaceable cone and flapper. Flange drilling as per Jash-Schütte.
Designed to prevent bridging of material and to allow in-situ replacement of seat and flapper. C-401 is offered in short height for space-tight installations; C-402 has increased height for higher flow rate.
Used for: Process control in power plants, refineries, oil and gas, fertilizer, petrochemical and other process industries.
KSB MIL control valve range
Product
Description
Standard size (inch)
Rating (ASME class)
Seat leakage – standard
Seat leakage – optional
MIL 10000
Double ported top & bottom guided control valve
¾ – 16
150# – 1500#
II
III / VI
MIL 10R – 21R
Direct operated pressure regulator
1 – 4
150# – 600#
II / IV
—
MIL 21000
Single seated heavy top guided globe control valve
½ – 10
150# – 2500#
IV
V / VI
MIL 22000
Bellows sealed valve for critical service
¼ – 4
150# – 2500#
<1×10⁻⁵ mbar l/s across seat
—
MIL 27000
Compact globe control valve
½ – 2
150# – 300#
IV
V / VI
MIL 29000
Micropak micro-flow control valve
½ – 1
150# – 1500#
IV
V
MIL 41000
Single seated heavy duty cage guided globe control valve
½ – 36
150# – 4500#
III / IV
V
MIL 50000
Cryogenic valve
½ – 4
150# – 2500#
IV
V / VI
MIL 63000
Desuperheater
—
—
—
—
MIL 70000
Single seated heavy top guided angle control valve
½ – 10
150# – 2500#
IV
V / VI
MIL 71000
Single seated heavy duty cage guided angle control valve
½ – 36
150# – 4500#
III / IV
V
MIL 76000
High pressure letdown control valve
1 – 2
150# – 2500#
IV
V
MIL 77000
Multi-stage labyrinth Lo-dB control valve
2 – 8
600# – 2500#
IV
V
MIL 78000
Multi-stage anti-cavitation / low noise control valve
½ – 6
300# – 2500#
IV & V
VI
MIL 81000
Three-way combining and diverting control valve
¾ – 12
150# – 2500#
IV
VI
MIL 91000
Multi-stage multi-path axial flow control valve
¾ – 20
150# – 4500#
V
VI
From the KSB MIL company profile. Other sizes and ratings on request. Valves are available with Ecolock low-emission gland sealing sets or bellows sealed glands.
Notes
KSB MIL Controls Ltd (formerly MIL Controls) is part of the KSB Group, Germany. Plants at Thrissur, Kerala.
Severe-service designs include anti-cavitation and low-noise trims, multi-stage labyrinth trims, high pressure letdown and cryogenic valves.
Applications listed by KSB MIL: boiler feed and circulation, soot blower, HP/LP bypass and heater drains in thermal power plants; hydrocracking, hydrogen, ammonia and urea letdown, LNG and cryogenic service in refineries and fertilizer plants.
KSB MIL
Actuators, Positioners and Accessories
Diaphragm actuators
MIL 37-38: sizes 11 to 24, travel up to 4", supply 20–65 psig
Piston actuators
MIL 67-68: sizes 6 to 24, travel up to 12", supply 60–100 psig
Positioners
MIL 7400 pneumatic, MIL 8013 electro-pneumatic; smart positioners (HART, Profibus, Foundation Fieldbus)
Used for: Operating and monitoring control valves; electrical and electro-hydraulic actuators can also be fitted.
Key specifications
Diaphragm actuators
MIL 37-38: sizes 11 to 24, travel up to 4", supply 20–65 psig
Piston actuators
MIL 67-68: sizes 6 to 24, travel up to 12", supply 60–100 psig
Positioners
MIL 7400 pneumatic, MIL 8013 electro-pneumatic; smart positioners (HART, Profibus, Foundation Fieldbus)
Used for: Operating and monitoring control valves; electrical and electro-hydraulic actuators can also be fitted.
Notes
MIL 496 rotary limit switches with SPDT / DPDT microswitches or proximity sensors, for valve position indication and interlocks.
MIL 400L electronic position transmitter, 4–20 mA output, LVDT principle.
Smart positioners are compatible with all major distributed control systems (DCS).
